The SIK torque limiter coupling provides reliable protection against mechanical overload. In the event of a collision, the straightforward design directly reduces the torque in a few fractions of a second. No tools or intervention are required in order for power transmission to be restored; all it takes is a 360° rotation in the reverse direction. As a result, this coupling remains unbeaten with regard to continuous operation and is completely maintenance -free. It is assembled using the VMA quick clamping unit. The frictional connection results in a high level of torque and enables fast assembly.
For direct drives, the torque limiter couplings are equipped with an attachment in the form of the tried-and-tested ASK sliced coupling or with metal bellows. Shaft offsets can be equalized in the same way. Under cramped conditions, the torque limiter coupling can also be fitted directly in the hubs, e.g., as in the case of a toothed belt pulley (or similar). The torque limiter couplings are available in 6 different versions.
Material: Steel, stainless steel also available on request
Safety Coupling with conical hub; for indirect drive; 0.2 to 3000 Nm
Order example: SIK-N1-2500 D=80H7
Safety Coupling; for indirect drive; with keyway connection; 0.2 to 3000 Nm
Order example: SIK-N2-500 D=25H7
Safety Coupling with metal bellow; for direct drives; up to 1800 Nm
Order example: SIK-N3-1500 D=80H7 with steel clamping hub
Safety Coupling with conical hubs and metal bellow; dircet drives; 5 Nm to 2700 Nm
Order example: SIK-N4-2500 D=60H7
CLAMBING RING 0.2 - 15 Nm | CONICAL HUB 5 - 3000 Nm | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions in mm | SERIES | 2 | 5 | 10 | 15 | 30 | 60 | 150 | 200 | 300 | 500 | 800 | 1500 | 2500 | ||||||||||||||
Adjustment range available from - to (Nm) (approx values) | TKN | 0.2-1.5 | 1-5 | 2.6 | 5-20 | 10-30 | 10-30 | 20-70 | 40-100 | 80-200 | 80-200 | 350-650 | 500-900 | 1000-1500 | ||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | 0.5-2.2 | 3-10 | 4-12 | 15-40 | 20-60 | 25-80 | 50-150 | 80-200 | 150-250 | 200-400 | 500-800 | 700-1300 | 1400-2200 | |||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | 7-15 | 30-60 | 30-90 | 50-100 | 100-225 | 150-280 | 200-440 | 250-500 | 650-950 | 1000-1800 | 2000-3000 | |||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | 250-400 | 320-650 | |||||||||||||||||||||||
Actuation dist.** (mm) | 0.8 | 0.8 | 1.2 | 1.5 | 1.7 | 1.7 | 1.9 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 3 | |||||||||||||||
** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ||||||||||||||
Adjustment range available from - to full disengagement (Nm) version (F) (approx values) | TKN | XX | XX | 2.5 | 7-15 | 8-20 | 15-30 | 40-80 | 60-120 | 60-180 | 80-150 | 200-400 | 700-1200 | 1000-1500 | ||||||||||||||
Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | 4-10 | 15.-30 | 30-60 | 80-150 | 100-220 | 160-300 | 100-300 | 400-650 | 1000-1500 | 1400-2200 | ||||||||||||||||
Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | 8-15 | 280-400 | 250-500 | 450-850 | 1500-1800 | 1800-2700 | ||||||||||||||||||||
Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | Adjustment rangeavailable from - tofull disengagement (Nm)version (F) (approx values) | 700-1000 | 1600-2000 | 2500-3000 | ||||||||||||||||||||||
Overall length (mm) | A | 28 | 32 | 39 | 40 | 50 | 54 | 58 | 63 | 70 | 84 | 95 | 109 | 146 | ||||||||||||||
Overall length full disengagement (mm) | AF | XX | XX | 39 | 40 | 50 | 54 | 58 | 66 | 73 | 88 | 95 | 117 | 152 | ||||||||||||||
Actuation ring Ø (mm) | B | 30 | 36 | 46 | 56 | 66 | 74 | 93 | 100 | 121 | 136 | 153 | 175 | 243 | ||||||||||||||
Actuation ring Ø full disengagement (mm) | BF | XX | XX | 51.5 | 62 | 70 | 83 | 98 | 117 | 132 | 155 | 177 | 187 | 258 | ||||||||||||||
Clambing fit length (mm) | C | 8 | 11 | 11 | 19 | 22 | 27.5 | 32 | 32 | 41 | 41 | 49 | 61 | 80 | ||||||||||||||
Inner diameter from Ø-Ø H7 (mm) | D | 4-12 | 5-14 | 6-20 | 8-22 | 12-22 | 12-30 | 15-37 | 20-44 | 25-56 | 25-56 | 30-60 | 35-70 | 50-100 | ||||||||||||||
Pilot diameter h7 (mm) | E | 22 | 25 | 34 | 40 | 47 | 55 | 68 | 75 | 82 | 90 | 100 | 125 | 168 | ||||||||||||||
Bolt-hole circle diameter ر0,2 | F | 28 | 35 | 43 | 47 | 54 | 63 | 78 | 85 | 90 | 110 | 120 | 148 | 202 | ||||||||||||||
Flange outs Ø -0,2 | G | 33 | 41 | 51 | 54 | 63 | 73 | 88 | 99 | 113 | 129 | 141 | 166 | 241 | ||||||||||||||
Thread | H | 4xM2.5 | 6xM2.5 | 6xM3 | 6xM4 | 6xM5 | 6xM5 | 6xM6 | 6xM6 | 6xM8 | 6xM8 | 6xM10 | 6xM12 | 6xM16 | ||||||||||||||
Thread depth (mm) | I | 4 | 4 | 5 | 6 | 8 | 9 | 10 | 10 | 10 | 12 | 15 | 16 | 24 | ||||||||||||||
Centering length -0,2 (mm) | J | 3.5 | 5 | 8 | 3 | 5 | 5 | 5 | 5 | 6 | 9 | 10 | 13.5 | 20 | ||||||||||||||
Distance (mm) | K | 6 | 8 | 11 | 8 | 11 | 11 | 12 | 12 | 15 | 21 | 19 | 25 | 34 | ||||||||||||||
Distance (mm) | L | 15 | 17 | 22 | 27 | 35 | 37 | 39 | 44 | 47 | 59 | 67 | 82 | 112 | ||||||||||||||
Distance**² full disengagement (mm) | LFLF | XX | XX | 24 | 27 | 37 | 39 | 41.5 | 47 | 51.5 | 62 | 75 | 94 | 120 | ||||||||||||||
**² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. | ||||||||||||||
Distance (mm) | M | 4 | 5 | 5 | ||||||||||||||||||||||||
Screw ISO 4762 tightening torque (Nm) | N | 1xM3 | 1xM4 | 1xM4 | 6xM4 | 6xM5 | 6xM6 | 6xM6 | 6xM6 | 6xM8 | 6xM8 | 6xM10 | 6xM12 | 6xM16 | ||||||||||||||
Screw ISO 4762tightening torque (Nm) | 2 | N | 4 | 4.5 | 4 | 6 | 8 | 12 | 14 | 18 | 25 | 40 | 70 | 120 | ||||||||||||||
Clambing ring Ø (mm) | O | 25 | 32 | 40 | ||||||||||||||||||||||||
Diameter (mm) | O1 | 18 | 21 | 30 | 35 | 42 | 49 | 62 | 67 | 75 | 84 | 91 | 112 | 154 | ||||||||||||||
Diameter h7 (mm) | O2 | 14 | 17 | 24 | 27 | 32 | 39 | 50 | 55 | 65 | 72 | 75 | 92 | 128 | ||||||||||||||
Distance between centers (mm) | P | 8 | 10 | 15 | ||||||||||||||||||||||||
Distance (mm) | R | 1.3 | 1.5 | 1.5 | 2.5 | 2.5 | 2.5 | 2.5 | 3 | 3 | 4 | 4 | 4.5 | 6 | ||||||||||||||
Moment of inertia (10-3kgm2) | Jges | 0.02 | 0.05 | 0.07 | 0.15 | 0.25 | 0.5 | 1.6 | 2.7 | 5.2 | 8.6 | 20 | 31.5 | 210 | ||||||||||||||
Approx weight (kg) | 0.065 | 0.120 | 0.22 | 0.4 | 0.7 | 1 | 1.3 | 2 | 3 | 4 | 5.5 | 10 | 28 |
The indeed weight depends on the size of the inner diameter (D).
SERIES 0002 - 0010 WITH KEYWAY 0,2 - 15 NM | SERIES 0015 - 2500 WITH KEYWAY 5 - 3000 NM | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Specification | SERIES | 2 | 5 | 10 | 15 | 30 | 60 | 150 | 200 | 300 | 500 | 800 | 1500 | 2500 | ||||||||||||||
Adjustment range available from - to (Nm) (approx values) | TKN | 0.2-1.5 | 1-5 | 2-6 | 5-20 | 10-30 | 10-30 | 20-70 | 40-100 | 80-200 | 80-200 | 350-650 | 500-900 | 1000-1500 | ||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | 0.5-2.2 | 3-10 | 4-12 | 15-40 | 20-60 | 25-80 | 50-150 | 80-200 | 150-250 | 200-400 | 500-800 | 700-1300 | 1400-2200 | |||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | 7-15 | 30-60 | 30-90 | 50-100 | 100-225 | 150-280 | 200-440 | 250-500 | 650-950 | 1000-1800 | 2000-3000 | |||||||||||||||
Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | Adjustment rangeavailable from - to (Nm)(approx values) | 250-400 | 320-650 | |||||||||||||||||||||||
Actuation dist.** (mm) | 0.8 | 0.8 | 1.2 | 1.5 | 1.7 | 1.7 | 1.9 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 3 | |||||||||||||||
** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ||||||||||||||
Adjustment range (F) available from - to (Nm) full disengagement version (F) (approx values) | TKN | XX | XX | 2-5 | 7-15 | 8-20 | 15-30 | 40-80 | 60-120 | 60-180 | 80-150 | 200-400 | 700-1200 | 1000-1500 | ||||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 4-10 | 15-30 | 30-60 | 80-150 | 100-220 | 160-300 | 100-300 | 400-650 | 1000-1500 | 1400-2200 | ||||||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 8-15 | 280-400 | 250-500 | 450-850 | 1500-1800 | 1800-2700 | ||||||||||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 700-1000 | 1600-2000 | 2500-3000 | ||||||||||||||||||||||
Overall length (mm) | A | 20 | 22 | 28 | 34 | 43 | 46 | 48.5 | 54 | 57 | 71.5 | 80 | 93 | 135 | ||||||||||||||
Overall length full disengagement (mm) | AF | XX | XX | 28 | 34 | 43 | 46 | 48.5 | 57 | 60 | 75 | 91 | 110 | 141 | ||||||||||||||
Actuation ring Ø (mm) | B | 30 | 36 | 46 | 56 | 66 | 74 | 93 | 100 | 121 | 136 | 153 | 175 | 243 | ||||||||||||||
Actuation ring Ø full disengagement (mm) | BF | XX | XX | 51.5 | 62 | 70 | 83 | 98 | 117 | 132 | 155 | 177 | 187 | 258 | ||||||||||||||
Clambing fit length (mm) | C | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | Clambing fit length is the Overall length (A, AF) | ||||||||||||||
Inner diameter from Ø-Ø H7 (mm) | D | 4-10 | 5-12 | 6-16 | 8-19 | 12-22 | 12-28 | 15-38 | 20-44 | 25-50 | 25-58 | 30-60 | 35-73 | 50-95 | ||||||||||||||
Pilot diameter h7 (mm) | E | 22 | 25 | 34 | 40 | 47 | 55 | 68 | 75 | 82 | 90 | 100 | 125 | 168 | ||||||||||||||
Bolt-hole circle diameter ر0,2 | F | 28 | 35 | 43 | 47 | 54 | 63 | 78 | 85 | 98 | 110 | 120 | 148 | 202 | ||||||||||||||
Flange outs Ø -0,2 | G | 33 | 41 | 51 | 54 | 63 | 73 | 88 | 99 | 113 | 129 | 141 | 166 | 241 | ||||||||||||||
Thread | H | 4xM2.5 | 6xM2.5 | 6xM3 | 6xM4 | 6xM5 | 6xM5 | 6xM6 | 6xM6 | 6xM8 | 6xM8 | 6xM10 | 6xM12 | 6xM16 | ||||||||||||||
Thread depth (mm) | I | 4 | 4 | 5 | 6 | 8 | 9 | 10 | 10 | 10 | 12 | 15 | 16 | 24 | ||||||||||||||
Centering length -0,2 (mm) | J | 3.5 | 5 | 8 | 3 | 5 | 5 | 5 | 5 | 6 | 9 | 10 | 13.5 | 20 | ||||||||||||||
Distance (mm) | K | 6 | 8 | 11 | 8 | 11 | 11 | 12 | 12 | 15 | 21 | 19 | 25 | 34 | ||||||||||||||
Distance (mm) | L | 15 | 17 | 22 | 27 | 35 | 37 | 39 | 44 | 47 | 59 | 67 | 82 | 112 | ||||||||||||||
Distance**² full disengagement (mm) | LF | XX | XX | 24 | 27 | 37 | 39 | 41.5 | 47 | 51.5 | 62 | 75 | 94 | 120 | ||||||||||||||
**² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (LF) of a full disengagement version depends on, how much springs are needed. | ||||||||||||||
Diameter (mm) | O1 | 18 | 21 | 30 | 35 | 42 | 49 | 62 | 67 | 75 | 84 | 91 | 112 | 154 | ||||||||||||||
Diameter h7 (mm) | O2 | 14 | 17 | 24 | 27 | 32 | 39 | 50 | 55 | 65 | 72 | 75 | 92 | 128 | ||||||||||||||
Distance (mm) | R | 1.3 | 1.5 | 1.5 | 2.5 | 2.5 | 2.5 | 2.5 | 3 | 3 | 4 | 4 | 4.5 | 6 | ||||||||||||||
Moment of inertia (10-3kgm2) | Jges | 0.02 | 0.05 | 0.07 | 0.15 | 0.25 | 0.5 | 1.6 | 2.7 | 5.2 | 8.6 | 20 | 31.5 | 210 | ||||||||||||||
Approx weight (kg) | 0.065 | 0.120 | 0.22 | 0.4 | 0.7 | 1 | 1.3 | 2 | 3 | 4 | 5.5 | 10 | 28 |
The indeed weight depends on the size of the inner diameter (D).
SERIES 0002 - 0010 WITH ALUMINIUM CLAMBING RING 0,2 - 12 Nm | SERIES 0015 - 0060 WITH ALUMINIUM CLAMBING HUB 5 - 80 Nm | SERIES 0150 - 1500 WITH STAHL CLAMBING HUB 20 - 1800 Nm | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Specification | SERIES | 2 | 5 | 10 | 15 | 30 | 60 | 150 | 200 | 300 | 500 | 800 | 1500 | |||||||||||||
Adjustment range available from - to (approx values) (Nm) | TKN | 0.2-1.5 | 1-5 | 2-6 | 5-15 | 5-15 | 10-30 | 20-70 | 40-100 | 80-200 | 80-200 | 350-650 | 500-900 | |||||||||||||
Adjustment rangeavailable from - to(approx values) (Nm) | 0.5-2.2 | TKN | 3-6 | 4-12 | 8-20 | 10-30 | 25-80 | 50-150 | 80-240 | 150-250 | 200-400 | 500-800 | 700-1300 | |||||||||||||
Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | 200-320 | 250-500 | 1000-1800 | ||||||||||||||||||||
Actuation dist.** (mm) | 0.8 | 0.8 | 1.2 | 1.5 | 1.7 | 1.7 | 1.9 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | ||||||||||||||
** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | |||||||||||||
Adjustment range (F) available from - to (Nm) full disengagement version (F) (approx values) | TKN | XX | XX | 2-5 | 7-15 | 8-20 | 15-30 | 40-80 | 60-120 | 60-180 | 80-150 | 200-400 | 700-1200 | |||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 4-10 | 15-30 | 30-60 | 80-150 | 100-220 | 160-300 | 100-600 | 400-650 | 1000-1500 | |||||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 8-15 | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) 8-15 | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) 8-15 | 280-400 | 250-500 | 450-850 | 1500-1800 | |||||||||||||||||||
700-1000 | 1600-2000 | |||||||||||||||||||||||||
Overall length (mm) | A1 | 46 | 57 | 65 | 75 | 87 | 102 | 116 | 128 | 139 | 163 | 190 | 223 | |||||||||||||
Overall length (mm) | A2 | 51 | 65 | 74 | 82 | 95 | 112 | 128 | 140 | 153 | 177 | XX | XX | |||||||||||||
Overall length full disengagement (mm) | A1F | XX | XX | 65 | 75 | 87 | 102 | 118 | 131 | 142 | 167 | 201 | 232 | |||||||||||||
Overall lengthfull disengagement (mm) | A2F | XX | XX | 74 | 82 | 95 | 112 | 130 | 143 | 156 | 181 | XX | XX | |||||||||||||
Actuation ring Ø (mm) | B | 30 | 36 | 46 | 56 | 66 | 74 | 93 | 100 | 121 | 136 | 153 | 175 | |||||||||||||
Actuation ring Ø full disengagement (mm) | BF | XX | XX | 51.5 | 62 | 71 | 84 | 99 | 118 | 132 | 155 | 177 | 187 | |||||||||||||
Clambing fit length (mm) | C | 13 | 16 | 16 | 22 | 27 | 31 | 35 | 40 | 42 | 51 | 48 | 67 | |||||||||||||
Inner diameter Ø from Ø-Ø H7 (mm) | D1 D2 | 4-12 | 5-14 | 6-20 | 10-26 | 12-30 | 15-32 | 19-42 | 24-45 | 30-60 | 35-60 | 40-75 | 50-80 | |||||||||||||
Diameter (mm) | D3 | 12.1 | 14.1 | 20.1 | 21.1 | 24.1 | 32.1 | 36.1 | 42.1 | 58.1 | 60.1 | 60.1 | 68.1 | |||||||||||||
Outside diameter of Hubs (mm) | E | 25 | 32 | 40 | 49 | 55 | 66 | 81 | 90 | 110 | 123 | 134 | 157 | |||||||||||||
Distance (mm) | F | 13 | 15 | 17 | 19 | 24 | 28 | 31 | 35 | 35 | 45 | 50 | 63 | |||||||||||||
Distance**² full disengagement (mm) | FF | XX | XX | 16 | 19 | 22 | 29 | 30 | 33 | 35 | 43 | 54 | 61 | |||||||||||||
**² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | |||||||||||||
Distance (mm) | G | 4 | 5 | 5 | 6.5 | 7.5 | 9.5 | 11 | 12.5 | 13 | 17 | 18 | 22.5 | |||||||||||||
Screw ISO 4762 tightening torque (Nm) | I | M3 | M4 | M4 | M5 | M6 | M8 | M10 | M12 | M12 | M16 | 2xM16 | 2xM20 | |||||||||||||
Screw ISO 4762tightening torque (Nm) | 2 | I | 4 | 4.5 | 8 | 15 | 40 | 70 | 120 | 130 | 200 | 250 | 470 | |||||||||||||
Distance between centers (mm) | P | 8 | 10 | 15 | 17 | 19 | 23 | 27 | 31 | 39 | 41 | 2x48 | 2x55 | |||||||||||||
Moment of inertia (10-3kgm2) | Jges | 0.01 | 0.02 | 0.06 | 0.1 | 0.27 | 0.75 | 2.5 | 5.1 | 11.5 | 22.8 | 42 | 83 | |||||||||||||
Moment of inertia (10-3kgm2) | 0.01 | Jges | 0.02 | 0.07 | 0.15 | 0.32 | 0.8 | 2.8 | 5.3 | 11.8 | 23 | |||||||||||||||
Torsion stiffness (10³Nm/rad) | CT | 1.2 | 7 | 9 | 20 | 39 | 76 | 175 | 191 | 420 | 510 | 780 | 1304 | |||||||||||||
Torsion stiffness (10³Nm/rad) | 1.3 | CT | 5 | 8 | 15 | 28 | 55 | 110 | 140 | 350 | 500 | |||||||||||||||
Lateral ±(mm) | values | 0.15 | 0.2 | 0.2 | 0.15 | 0.2 | 0.2 | 0.2 | 0.25 | 0.25 | 0.3 | 0.35 | 0.35 | |||||||||||||
Lateral ±(mm) | max | 0.2 | 0.25 | 0.3 | 0.2 | 0.25 | 0.25 | 0.25 | 0.3 | 0.3 | 0.35 | |||||||||||||||
Angular | values | 1 | 1.5 | 1.5 | 1 | 1 | 1 | 1 | 1.5 | 1.5 | 2 | 2.5 | 2.5 | |||||||||||||
Angular | max | 1.5 | 2 | 2 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 2 | 2.5 | |||||||||||||||
Lateral spring stiffness (N/mm) | max | 40 | 290 | 280 | 475 | 900 | 1200 | 1550 | 2040 | 3750 | 2500 | 2000 | 3600 | |||||||||||||
Lateral springstiffness (N/mm) | values | 30 | 45 | 145 | 137 | 270 | 420 | 435 | 610 | 1050 | 840 | |||||||||||||||
Approx weight (kg) | 0.065 | 0.2 | 0.3 | 0.4 | 0.7 | 1 | 2.4 | 4 | 5.9 | 9.6 | 14 | 21 |
The indeed weight depends on the size of the inner diameter (D).
SERIES 0015 - 2500 WITH CONICAL HUBS 5 - 2700 Nm | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Specification | SERIES | 15 | 30 | 60 | 150 | 200 | 300 | 500 | 800 | 1500 | 2500 | |||||||||||
Adjustment range available from - to (approx values) (Nm) | TKN | 5-15 | 5-15 | 10-30 | 20-70 | 40-100 | 80-200 | 80-200 | 350-650 | 500-900 | 1000-1500 | |||||||||||
Adjustment rangeavailable from - to(approx values) (Nm) | 8-20 | TKN | 10-30 | 25-80 | 50-150 | 80-240 | 150-250 | 200-400 | 500-800 | 700-1300 | 1400-2200 | |||||||||||
Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | Adjustment rangeavailable from - to(approx values) (Nm) | 200-320 | 250-500 | 1000-1800 | 2000-2800 | |||||||||||||
Actuation dist.** (mm) | 1.5 | 1.7 | 1.7 | 1.9 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 3 | ||||||||||||
** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. | |||||||||||
Adjustment range (F) available from - to (Nm) full disengagement version (F) (approx values) | TKN | 7-15 | 8-20 | 15-30 | 40-80 | 60-120 | 60-180 | 80-150 | 200-400 | 700-1200 | 1000-1500 | |||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 15-30 | 30-60 | 80-150 | 100-220 | 160-300 | 100-300 | 400-650 | 1000-1500 | 1400-2200 | ||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 280-400 | 250-500 | 450-850 | 1500-1800 | 1800-2700 | ||||||||||||
Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | Adjustment range (F)available from - to (Nm)full disengagementversion (F) (approx values) | 700-1000 | 1600-2000 | |||||||||||||
Overall length (mm) | A1 | 62 | 72 | 84 | 93 | 99 | 114 | 123 | 151 | 175 | 246 | |||||||||||
Overall length (mm) | A2 | 69 | 80 | 94 | 105 | 111 | 128 | 136 | XX | XX | XX | |||||||||||
Overall length full disengagement (mm) | A1F | 62 | 72 | 84 | 93 | 102 | 117 | 127 | 151 | 184 | 252 | |||||||||||
Overall lengthfull disengagement (mm) | A2F | 69 | 80 | 94 | 105 | 114 | 131 | 140 | XX | XX | XX | |||||||||||
Actuation ring Ø (mm) | B | 56 | 66 | 74 | 93 | 100 | 121 | 136 | 153 | 175 | 244 | |||||||||||
Actuation ring Ø full disengagement (mm) | BF | 62 | 70 | 83 | 98 | 117 | 132 | 155 | 177 | 187 | 258 | |||||||||||
Clambing fit length (mm) | C | 19 | 22 | 27 | 32 | 32 | 41 | 41 | 49 | 61 | 80 | |||||||||||
Inner diameter Ø from Ø-Ø H7 (mm) | D1 D2 | 10-22 | 12-23 | 12-29 | 15-37 | 20-44 | 25-56 | 25-60 | 30-60 | 35-70 | 50-100 | |||||||||||
Outside diameter of Hubs (mm) | E | 49 | 55 | 66 | 81 | 90 | 110 | 123 | 133 | 157 | 200 | |||||||||||
Distance (mm) | F | 13 | 16 | 18 | 19 | 19 | 23 | 25 | 31 | 30 | 34 | |||||||||||
Distance**² full disengagement (mm) | FF | 13 | 14 | 17 | 18 | 17 | 20 | 22 | 20 | 26 | 31 | |||||||||||
**² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | **² = The distance (FF) of a full disengagement version depends on, how much springs are needed. | |||||||||||
Screw ISO 4762 tightening torque (Nm) | M4 | M5 | M5 | M6 | M6 | M8 | M8 | M10 | M12 | M16 | ||||||||||||
Screw ISO 4762tightening torque (Nm) | 4 | 6 | 8 | 12 | 14 | 18 | 25 | 40 | 70 | 120 | ||||||||||||
Moment of inertia (10-3kgm2) | Jges | 0.1 | 0.28 | 0.75 | 1.9 | 2.8 | 5.5 | 11.0 | ||||||||||||||
Moment of inertia (10-3kgm2) | 0.15 | Jges | 0.3 | 0.8 | 2 | 3 | 6 | 12.8 | 20 | 42 | 257 | |||||||||||
Torsion stiffness (10³Nm/rad) | CT | 20 | 39 | 76 | 175 | 191 | 420 | 510 | 780 | 1304 | 3400 | |||||||||||
Torsion stiffness (10³Nm/rad) | 15 | CT | 28 | 55 | 110 | 140 | 350 | 500 | ||||||||||||||
Lateral ±(mm) | values | 0.15 | 0.2 | 0.2 | 0.2 | 0.25 | 0.25 | 0.3 | 0.35 | 0.35 | 0.35 | |||||||||||
Lateral ±(mm) | max | 0.2 | 0.25 | 0.25 | 0.25 | 0.3 | 0.3 | 0.35 | ||||||||||||||
Angular | values | 1 | 1 | 1 | 1 | 1.5 | 1.5 | 2 | 2.5 | 2.5 | 2.5 | |||||||||||
Angular | max | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 2 | 2.5 | ||||||||||||||
Lateral spring stiffness (N/mm) | max | 475 | 900 | 1200 | 1550 | 2040 | 3750 | 2500 | 2000 | 3600 | 6070 | |||||||||||
Lateral springstiffness (N/mm) | values | 137 | 270 | 380 | 435 | 610 | 1050 | 840 | ||||||||||||||
Approx weight (kg) | 0.3 | 0.4 | 1.2 | 2.3 | 3 | 5 | 6.5 | 9 | 16.3 | 35 |
The indeed weight depends on the size of the inner diameter (D).